130 mhz saw filter 9 mhz bandwidth part number: SF0130BA03030T spectrum microwave 400 nickerson road, marlbo rough, ma 01752, usa ? phone 1-508-251-6400 ? fax 1-508-251-6401 www.spectrummicrowave.com dsSF0130BA03030T rev b 22-feb-2010 ecn 36650 page 1 of 3 description ? 130 mhz saw bandpass filter with 9 mhz bandwidth for wireless data applications. ? 22.1 x 12.7 mm dip. ? rohs compliant. typical performance horizontal: frequency : 2 mhz/div vertical from top: relative magnitude : 10 db/div relative magnitude : 1 db/div group delay : 20 ns/div
130 mhz saw filter 9 mhz bandwidth part number: SF0130BA03030T spectrum microwave 400 nickerson road, marlbo rough, ma 01752, usa ? phone 1-508-251-6400 ? fax 1-508-251-6401 www.spectrummicrowave.com dsSF0130BA03030T rev b 22-feb-2010 ecn 36650 page 2 of 3 specification parameter min typ max units center frequency ( fc) nominal - 130.0 - mhz insertion loss 2 - 27 30 db amplitude ripple (over fc 4.3 mhz) - 0.5 0.8 db p-p group delay ripple (over fc 4.0 mhz) - 10 25 ns p-p 1 db lower band edge 3 - 125.5 125.7 mhz 1 db upper band edge 3 134.3 134.5 - mhz 38 db lower band edge 3 123.5 123.7 - mhz 38 db upper band edge 3 - 136.3 136.5 mhz rejection ( 70 to 123.5 mhz) 3 38 45 - db rejection (136.5 to 210 mhz) 3 38 45 - db absolute delay - 1.27 - us source / load impedance 50 ? temperature coefficient of frequency -18 ppm/o c notes: 1. average of lower and upper 3 db frequencies (3 db measured from peak). 2. average loss over fc +/- 4.0 mhz. 3. measured relative to the insertion loss level. maximum ratings parameter min max units storage temperature range -40 85 ? c operating temperature range -10 50 ? c operating input power level - +10 dbm matching circuit note: external matching components are not required. input 50 ? single-ended output 50 ? single-ended 14 7 1 8
130 mhz saw filter 9 mhz bandwidth part number: SF0130BA03030T spectrum microwave 400 nickerson road, marlbo rough, ma 01752, usa ? phone 1-508-251-6400 ? fax 1-508-251-6401 www.spectrummicrowave.com dsSF0130BA03030T rev b 22-feb-2010 ecn 36650 page 3 of 3 package outline iso 9001 registered all specifications are believed to be accurate and reliable. howe ver, spectrum microwave reserves the right to make changes wit hout notice. ? 2010 all rights reserved. units: mm tolerances are 0.15 mm except for the overall length, width and pad dimensions, which are nominal values. pin configuration: input: 14 input return: 1 output: 7 output return: 8 ground: 2,9
|